Panasonic Section 520 manual Option port=

Section 520 - TSAPI Chapter 3. Installation

Option: port=

Range: 1 to 8

Default: 1

Runtime modifiable: No

Purpose: Specifies which serial port on the server PC is connected to the

DBS for Telephony Services.

Option: baud=

Range: 9600 or 19200

Default: 9600

Runtime modifiable: No

Purpose: Specifies the DBS API baud rate. This must match the DBS setting.

Option: security=

Range: 1 to 3

Default: 2 (Medium)

Runtime modifiable: No

Purpose: Specifies the CSTA stream control security level. The values 1, 2, and 3 translate to CSTA ranges High (all commands checked for validity), Medium (login only checked for validity), and None (no checks performed), respectively. Most client applications require level 2 or above.

Option: setmwi=

Range: 10-699

Default: -1 (disabled)

Runtime modifiable: Yes

Purpose: Specifies the activator extension of a CSTA set message waiting indicator request. Normally supplied through private data, most applications are not written to support this option for Panasonic -- this allows the command to be honored by the driver and passed to the DBS. If not set, and private data not supplied, the command is rejected.

Option: sendfail=

Range: 0 or 1

Default: 1 (Enabled)

Runtime modifiable: Yes

Purpose: Specifies whether the driver should send CSTA failed events to the application when receiving busy tone from the DBS on a given monitored extension

DBS-92-520 Issued April 2000 11