Tuning Menu
Auto Tune
This television has been factory tuned to all major city channels. Use the automatic tuning procedure only if you wish to reset ALL Programme Location Numbers. Refer to “Manual Tune” on page 29 if you only want to retune one or two Programme Location Numbers.
The television should be switched ON and the TV/AV Switch set to TV.
When you start the automatic search, the television will automatically search for television broadcasts through both VHF bands and the UHF band. During this process all of the available television broadcast channels will be automatically allocated to sequential Programme Number locations.
|
|
|
|
|
|
|
Using the Front Panel |
| Using the Remote Control | ||||
|
|
|
|
|
|
|
1. | Push the F button repeatedly until the Tuning |
| 1. | Push the SET UP | button. | |
| Menu is reached. |
| 2. | Push the /\ or \/ button to select the Tuning | ||
2. | Push the |
|
| Menu. (See page 27). |
|
|
| Tuning Menu. (See page 27). |
| 3. | Push the - or + button to access the Tuning | ||
3. | Push the F button to access the Auto Tune. |
|
| Menu. |
|
|
4. | Push |
| 4. | Push the /\ or \/ button to select the Auto | ||
|
| Tune. |
|
| ||
|
|
| 5. | Push the - or + button to start the Auto Tune. | ||
|
|
|
|
|
|
|
The television will automatically allocate each received broadcast signal to a Programme Number, starting at position number 1. As each station is stored the Panasonic logo will appear momentarily. The operation will cease when all available channels have been tuned.
29
CH 29
AUTO SETUP IN PROGRESS
SEARCHING :
STORED CH29
F | : RETURN TO TUNING MENU |
TV/AV | : TO EXIT |
Push the F button to return the television to the Tuning Menu.
29
CH 29
AUTO SETUP IN PROGRESS
SEARCHING :
STORED CH29
SETUP | : RETURN TO TUNING MENU |
TV/AV | : TO EXIT |
Push the Set Up
button to return the television to the Tuning menu.
Push the 
button on the remote control to return the television to normal operation.
28
