Panasonic TX-76PW100A, TX-86PW100A, TX-76PW50A operating instructions Aspect Controls

Aspect Controls

Press the ASPECT button to select the different Aspect options. The options available are AUTO, 4:3, ZOOM, S-ZOOM, 16:9, 14:9 and JUST.

Mode			Picture				Description
AUTO							The AUTO position can be set to 4:3 or to
							JUST. When a wide screen signal is
							detected at the Video terminal the TV will
							select the16:9 aspect ratio.
	16:9 Signal					4:3 Signal
4 : 3							This option will display a standard 4:3
							picture without any stretching or
							compression. There will be vertical black
							lines down either side of the picture
ZOOM		ZOOM					This option allows you to magnify part of the
							picture. The coloured buttons let you
							change the position of the magnified area.
							Red	V SIZE -	Make picture Shorter.
							Green	V SIZE +	Make picture Taller.
			V - SIZE -	V - SIZE +	V - POS -	V - POS +
							Yellow	V POS -	Move picture Down.
							Blue	V POS +	Move picture Up.
S - ZOOM							S-ZOOM displays part of the picture at
							greater magnification that the ZOOM mode
		S - ZOOM
							does. The coloured buttons let you change
							the size of the magnified area.
							Red	H POS -	Move picture Left.
			H - POS -	H - POS +	V - POS -	V - POS +	Green	H POS +	Move picture Right.
							Yellow	V POS -	Move picture Down.
							Blue	V POS +	Move picture Up.
16 : 9							The 16:9 option will display the picture at its
							maximum size. Signals in the 4:3 format will
							be stretched to fit the picture.
	16:9 Signal					4:3 Signal
14 : 9							The 14:9 option will display a 4:3 signal in
							simulated wide screen. The picture is
							slightly stretched. It is also slightly cropped
							top and bottom.
JUST							JUST gives you a “best fit” option when
							showing 4:3 on wide screen. The centre of
							the picture is not affected but there is some
							stretching at the edges.

23