Setup menu - Owner ID
Owner ID allows you to enter a security code and address information so that in the unfortunate event of theft it will help the Police to determine the owner.
Press the SETUP Button 
.
Move to Owner ID Option 
or 
buttons.
Access the Owner ID 
or 
buttons
Note: Pushing the 
button at any time will return you to normal viewing without saving any of the changes you have made.
If the Owner ID has previously been set, enter your PIN followed by ‘STR’ to proceed, this will take you to the NAME option.
If your Owner ID has not been set you can enter a PIN (using 0 to 9 on the remote control) or the Up / Down buttons.
You will be taken automatically to the NAME line. If not, move to the NAME line.
Enter your name. Use the left and right buttons to move from character to character.
Use the Up and Down buttons to change the character.
Move to HOUSE NO.
Enter your House Number (or other identification). Use the left and right buttons to move from character to character.
Use the Up and Down buttons to change the character.
This is the message you will see if you have already set your ID details.
This is the message you will see if you have not already set your ID details.
| Change |
| character |
| Select |
Return | character |
TV/AV | Exit |
‘STR’ Button - Enter PIN Number
| Change |
| character |
| Select |
Return | character |
TV/AV | Exit |
‘STR’ Button - Store Owner ID
Move to POSTCODE.
Enter your Postcode. Use the left and right buttons to move from character to character.
Use the Up and Down buttons to change the character.
Press STR to store your details.
You will be asked “Are you sure?”
Press STR to confirm the details.
Owner ID
PIN NUMBER: 1 1 1 1
NAME: P A N A S O N I C * * * * *
HOUSE NO: P E N R I T H * * * *
POSTCODE: * * * * * * * * * * *
