Getting Started
Connect the Aerial
The RF (Aerial) Input impedance of this television is 75Ω. If your aerial lead is 300Ω ribbon (two wires separated by a flat plastic strip) you will require a 300Ω/75Ω Balun (not supplied) in order to connect your aerial to the television.
Panasonic AVC Networks Australia Pty. Ltd.
MODEL
CHASSIS GP1E
220 ~ 240V 50Hz 179W
WARNING - DANGEROUS VOLTAGE INSIDE.
|
|
|
| |
VIDEO |
| Y | Y |
|
|
|
|
| |
|
| P | P |
|
L |
|
|
|
|
AUDIO |
| P | P |
|
R |
|
|
|
|
|
| COMPONENT | COMPONENT |
|
MONITOR OUT | A V 1 I N | AV2 IN | A V 4 I N | AV5IN |
Note:
For your safety any external aerial should be installed by a reputable qualified installer and should comply with Australian Standard AS1417.1.
In New Zealand the installation should comply with International Standard
Connect the Power Plug
The televisions are designed for the Australian Standard Mains Voltage of 240V 50Hz and the New Zealand Standard Mains Voltage of 230V 50Hz.
NOTE:
If the television is not going to be used for an extended period, remove the power plug from the wall outlet.
Turn on the Television
Push the Power Switch to turn the television ON.
Sit back and enjoy your new Panasonic television.
Panasonic
Power Switch
