GETTING STARTED
Step 1c. Digital Satellite Receiver connection to TV or Monitor
Follow this diagram when connecting the Digital Satellite Receiver to a Television or Monitor.
AUDIO
R L VIDEO
INPUT
ANT IN
TV
NOTE: A/V CABLES AND MODEM
CABLE INCLUDED.
Incoming signal from cable or antenna
Digital Satellite Receiver
SATELLITE |
|
IN | NTSC OUTPUT |
| |
|
VHF/UHF
IN
VHF (SAT) /UHF | TEL LINE | AC IN |
OUT |
|
|
DIGITAL SATELLITE RECEIVER CONNECTION TO TV OR MONITOR
Procedure
•Connect the VHF (SAT) /UHF OUT to the ANT IN of the television or connect video cable from the video output jack on the Digital Satellite Receiver to the video input jack on the TV.
•Connect audio cables from the left and right NTSC audio output jacks on the Digital Satellite Receiver to the left and right audio input jacks on the TV.
To receive off-air programming (no cable box)
•Turn off the Digital Satellite Receiver or press TV/SAT button to toggle.
•Tune TV to desired channel.
To receive off-air programming (with cable box)
•Turn off the Digital Satellite Receiver or press TV/SAT button to toggle.
•Tune TV to cable box output channel (either CH3 or Ch4).
•Tune the cable channels using the cable box.
Note: Modem should also be connected to a telephone jack using the cable supplied RJ11C cable if impulse pay per view services are desired.
18
