Panasonic TZ-DBS01 Digital Satellite Receiver Connection to VCR, To record off-air programming

GETTING STARTED

Step 1e. Digital Satellite Receiver Connection to VCR

Follow this diagram when connecting the Digital Satellite Receiver to a standard VCR.

TV

R-AUDIO-L VIDEO

ANT IN

VCR

NOTE: A/V CABLES AND MODEM CABLE INCLUDED.

ANT OUT

VIDEO OUT

R-AUDIO-L VIDEO

ANT IN

VIDEO IN

SATELLITE

IN

NTSC OUTPUT

R-AUDIO-L VIDEO

Incoming Signal from antenna or cable

DIGITAL SATELLITE RECEIVER

VHF/UHF

IN

AC IN

VHF (SAT) /UHF TEL LINE

OUT

VCR SETUP

Procedure

•Connect video cable from the video output jack on the Digital Satellite Receiver to the video input jack on the VCR.

•Connect audio cables from the left and right audio output jacks on the Digital Satellite Receiver to the left and right audio input jacks on the VCR.

•Connect video cable from video output jack on the VCR to video input jack on TV.

•Connect the audio out cables from the audio output jacks on the VCR to the audio input jacks on the TV.

To record off-air programming

•Turn off satellite receiver or press TV/SAT button to toggle. Tune the VCR to desired channel and push record button on the VCR to start recording

Note: This Digital Satellite Receiver incorporates an anticopy process technology that is protected by U.S. patents and other intellectual property rights measures. The anticopy process is licensed for non-commercial, home use only. Reverse engineering or disassembly is prohibited.

20