Ricoh R5 manual 144, Click Installing the software, Confirm the language, and then click OK

Downloading Images to Your Computer

6

Installing the Software Required for Handling the Camera and Images

Install the required software on your computer before connecting the camera.

Caution------------------------------------------------------------------------------------------

•Do not install the software when the camera is connected to your computer with a USB cable.

•If you happened to connect your camera to the computer (resulting in the [Add New Hardware Wizard] screen appearing on your computer screen), simply click [Cancel], and after disconnecting your camera, install the software on your computer.

•If software is already installed from a Caplio Software CD-ROM from a previous model, a message stating that the old software must be uninstalled before installing the new one is displayed.

Follow the message instructions and uninstall the old software before installing the new software. Functions of the old model can still be used as before.

If DU-10 is installed, it will be replaced by Caplio Viewer (an upgraded version of DU- 10). If the old software is uninstalled before the message is displayed, Caplio Viewer is not installed even if the new software is installed. (For how to uninstall the software, see P.150.)

•For Windows XP or Windows 2000, administrator privileges are required to install the software.

Here is an example of the Windows XP screen.

1 Start your computer and insert the Caplio Software CD-ROM in the CD-ROM drive.

•The installer screen appears automatically.

2 Click [Installing the software].

•After a while, the [Choose Setup Language] screen appears.

3 Confirm the language, and then click [OK].

•The [Welcome to the InstallShield Wizard for Caplio Software] screen appears.

144