5 |
Changing Camera Settings
Displaying a Settings Change Warning (SHTG STGS WARNG.)
If the initial settings are changed for the following functions, you can set the camera to have the icon of that function blink and to display a warning message about the function with the changed setting for a few seconds when the camera is turned on.
White balance, Focus, ISO setting, Exposure compensation, Time exposure
If you operate a camera button while an icon is blinking, the icon stops blinking and lights steadily. If you operate a camera button while the warning message is displayed, the message disappears.
Available Settings
ON (Enable warnings) *Default setting
OFF (Disable warnings)
To set change warning, follow the steps below.
1 Display the SETUP menu.
• For the operating procedure, see P.114.
2 Press the " button to select [SHTG STGS WARNG.] and press the $ button.
3 Press the !" buttons to select the desired setting.
4 Press the MENU/OK button, or
#button and press the MENU/ OK button.
