Assigning a Function to the ADJ. Button (ADJ BTN. SET.)
You can use the ADJ. button to display the screens for setting the exposure compensation and white balance with fewer button operations and without displaying the Shooting Setting menu. You can also use [ADJ BTN. SET.1] and [ADJ BTN. SET.2] to add a camera function that can be activated by pressing the ADJ. button.
Available Settings | Refer to |
OFF *Default setting for [ADJ BTN. SET.2] | - |
ISO (ISO SETTING) *Default setting for [ADJ BTN. SET.1] | P.85 |
QUALITY (PIC QUALITY/SIZE) | P.62 |
FOCUS | P.64 |
SHARP (SHARPNESS) | P.68 |
METERING (PHOTOMETRY) | P.67 |
CONT MDE (CONT. MODE) | P.69 |
AUTO BKT (AUTO BRACKET) | P.74 |
WITH SND (IMAGE WITH SOUND) | P.80 |
To assign a function to either [ADJ BTN. SET.1] or [ADJ BTN. SET.2], follow the steps below.
1 Display the SETUP menu.
• For the operating procedure, see P.114.
2 Press the " button to select [ADJ BTN. SET.1] or [ADJ BTN. SET.2], and then press the $ button.
3 Press the !" buttons to select the desired setting.
4 Press the MENU/OK button, or
#button and press the MENU/ OK button.
5 |
Changing Camera Settings
Note
For information on how to use the ADJ. button, see P.56.
