
If you are using the camera for the first time, read this section.
Setting the Date and Time
When the power is turned on for the first time, the date/time setting screen appears.
1 | Press the !"#$ buttons to | |
| set the year, month, date and | |
| time. | |
| • Change the value with !" and | |
| move the frame with #$. | |
2 | In [FORMAT], choose the | Setting at shipping |
| ||
| ||
| date and time format. |
|
| • Select the date and time format |
|
3 | with !". |
|
Check the display and then |
| |
| press the MENU/OK button. |
|
|
|
• The date is set.
• Pressing the DISP. button on this screen allows you to cancel the setting.
Note
•If the battery is removed for more than one week, the date and time settings will be lost. These settings must be made again.
•To retain the date and time settings, load a battery with adequate remaining power for more than two hours.
•The set date and time can be changed later. (GP.126)
•The date and time can be inserted into images. (GP.81)
28