•To load images from the camera with assistance from the Windows XP “Scanner and Camera Wizard”, select [Microsoft Scanner and Camera Wizard].
•Leaving the [Always use this program for this action] check box unchecked will cause the [Caplio R5] screen to be displayed each time you transfer images from the camera, thereby allowing you to choose whether to use [RICOH Gate La] or the [Microsoft Scanner and Camera Wizard] for image transfers.
•If your PC is installed with Windows XP Service Pack 2 and a warning message is displayed, see P.170.
Note
•If the computer does not recognize the camera, uninstall the software (GP.150) and install it again.
•When downloading images from your camera, load a battery with adequate remaining power in the camera. Use of the AC adapter (sold separately) is recommended.
•When transferring images to a computer using RICOH Gate La, the file being transferred is renamed and saved.
Downloading Images in Mass Storage Mode
You can download images from the camera to a computer without having to use software.
1 Change [USB CONNECTION] to [MASS STR] on the SETUP menu.
•For more details, see P.131. At the time of purchase, [ORIGINAL] is selected.
2 Make sure that the camera power is off.
3 Connect the accessory USB cable to a USB port of your computer.
4 Connect the USB cable to the USB terminal of your camera.
• Your camera turns on.
• Your computer automatically reads a file necessary for recognizing the camera as a drive.
•After this preparation, the camera is displayed as a drive at [My Computer] (Windows) or Desktop (Macintosh).
Downloading Images to Your Computer
6 |
