Ricoh R5 manual Camera Shake COR

Using the Camera Shake Correction Function to Prevent Camera Shake

(CAMERA SHAKE COR)

You can prevent camera shake by turning on the camera shake correction function.

At the time of purchase, the camera shake correction function is turned on.

1 Switch the mode selector to 5.

2 Press the MENU/OK button.

• The Shooting Setting menu is displayed.

3 Press the " button to select [CAMERA SHAKE COR] and press the $ button.

4 Press the !" buttons to select [ON].

5 Press the MENU/OK button, or

#button and press the MENU/ OK button.

• The symbol appears on the screen.

Caution------------------------------------------------------------------------------------------

•The camera shake correction function is not available during Multi-shot shooting, long time exposure and movie shooting. If Multi-shot shooting or long time exposure is set while the camera shake correction function is turned on, Echanges to F. E disappears when the mode selector is switched to 3 (Movie Mode).

•The camera shake correction function cannot prevent movement of the shooting subject (caused by wind, etc.).

•Effects of the camera shake correction function vary depending on the surroundings.

Note ----------------------------------------------------------------------------------------------

1

Various Shooting Functions

The Jmark appears when camera shake is likely to occur. (GP.30) 87