5 |
Changing Camera Settings
Changing File Name Settings (SEQUENTIAL NO.)
When you shoot a still image, it is stored on an SD memory card or in the internal memory with a consecutively numbered file name that is automatically assigned.
When you switch SD memory cards, you can set your camera to continue consecutive numbering from the previously loaded card.
Available Settings |
|
ON (Continue numbering) | File names are automatically assigned to still images you take, |
| in the format of “R” followed by seven digits, from R0010001.jpg |
| to R9999999.jpg. |
| With this setting, file numbering is continued from one card to |
| the next. |
OFF (Do not continue | File numbering is assigned, from RIMG0001.jpg to |
numbering) *Default setting | RIMG9999.jpg, for each SD memory card. |
| When file name RIMG9999 is reached, no more data can be |
| recorded to that card. |
To change the file name setting, follow the steps below.
1 Display the SETUP menu.
• For the operating procedure, see P.114.
2 Press the " button to select [SEQUENTIAL NO.] and press the $ button.
3 Press the !" buttons to select the desired setting.
4 Press the MENU/OK button, or
#button and press the MENU/ OK button.
