Ricoh R5 manual Using the Self-Timer, Switch the mode selector to Press the t Self-timer button

If you are using the camera for the first time, read this section.

tUsing the Self-Timer

You can set the Self-timer to shoot after either two or ten seconds. A setting of two seconds is useful for preventing camera shake.

1 Switch the mode selector to 5.

2 Press the t (Self-timer) button.

•The Self-timer symbol appears on the screen.

•The [10] to the right of the symbol indicates the number of seconds. In this case, if you press the shutter release button, the camera will shoot after 10 seconds.

•Each press of the t (Self-timer) button changes the self-timer setting in the following order: 10 sec, 2 sec, and Self-timer Off.

3 Press the shutter release button.

•The focus is locked, and the flash blinks when the self-timer starts.

Note ---------------------------------------------------------------------------------------------------

•The camera remains in self-timer mode even after the image is shot. To cancel the self-timer, press the t (Self-timer) button and change the self-timer setting to [SELF-TIMER OFF].

•When the self-timer is set to 2 seconds, the flash does not blink.

42