IMPORTANT NOTES

Antenna/Cable Connection

A terrestrial antenna or cable antenna may be connected to the VHF/UHF IN jack of the Digital Satellite Receiver. This input works as a passthrough. The VHF/UHF channels can be passed through either by toggling TV/SAT button on remote control or by turning the Digital Satellite Receiver off. The RF output (VHF (SAT) UHF OUT) of the Digital Satellite Receiver must be connected to the television.

Antenna Connection

For proper reception of VHF/UHF channels, a directional antenna is required. For best reception, an outdoor antenna is recommended.

Procedure

ρConnect the antenna cable from your antenna to the VHF/UHF IN jack of the Digital Satellite Receiver.

Incoming Cable from

Home Antenna

75 Ohm ANT IN input on back of Digital Satellite Receiver

Cable Connection

Before connecting your cable to the Digital Satellite Receiver, contact your local cable provider and ask the following question:

Do you need a separate cable box to receive cable channels in your area?

Procedure

ρConnect the cable wire provided by your local cable provider.

Incoming Cable from

Cable Provider

75 Ohm ANT IN input on back of Digital Satellite

Receiver

9

Page 10
Image 10
Panasonic TZ-DBS01 operating instructions Antenna/Cable Connection, Antenna Connection, Procedure