Panasonic TZ-DRD100 Getting Started, Connect AC Power Cord, Directv Satellite dish Connection

GETTING STARTED

Getting Started

Step 1. Connect AC Power Cord

Plug the AC power cord into a grounded outlet. Do not turn on any devices until you have finished making all necessary connections.

Step 1a. DIRECTV Satellite dish Connection

Connect the DIRECTV Satellite dish downlead to the Satellite In jack on the rear panel of the Digital Satellite Receiver.

SATELLITE

DISH

SATELLITE
IN	NTSC OUTPUT
	R-AUDIO-L VIDEO

VHF/UHF

IN

VHF (SAT) /UHF	TEL LINE	AC IN
OUT

Note: With this receiver and the proper satellite dish antenna, you may be able to subscribe to local channels from DIRECTV in certain markets. Additional equipment may be required in some areas. Check with your retailer or visit DIRECTV.com for information on availability of local channels from DIRECTV in your area.

Step 1b. Antenna/Cable Connection

Connect the antenna or cable wire to the VHF/UHF IN jack on the rear panel of the Digital Satellite Receiver. The signal from the terrestrial antenna or cable will be passed through when the user presses the TV/SAT button on the remote control or when the digital satellite receiver is off. The RF output of the Digital Satellite Receiver must be connected to the television.

CABLE OR OFF-AIR ANTENNA

SATELLITE
IN	NTSC OUTPUT
	R-AUDIO-L VIDEO

VHF/UHF

IN

VHF (SAT) /UHF	TEL LINE	AC IN
OUT

17