Panasonic UF-7950, UF-6950 appendix Format, Originator

Setting Your Machine

Fax Parameters

	No.	Parameter	Setting	Setting		Comments
			Number
	151	EMAIL HEADER	1	All	Selecting the header information to print when an email is
		FORMAT			received. (Normally used for Troubleshooting. It shows the
			*2	Subject/
				From/To	path of the email transmission before arriving at your
					machine.)
			3	Off
	152	SUB-ADDRESS	*1	Invalid	Selecting whether to automatically route a received email
		ROUTING			using ITU-T sub-address.
			2	Valid
	153	TSI ROUTING	*1	Invalid	Selecting whether to route a received fax to an email
					address preprogrammed in Auto Dialer using the originating
			2	Valid
					fax’s Numeric ID (TSI frame information).
	154	ROUTING HEADER	*1	Originator	Selecting the type of email header to be included in the
		FORMAT			"From" field of each routed faxes.
			2	Relay Station
					Originator	: The originating fax machine’s TSI will
						appear in the "From" field of the routed
						email.
					Relay Station : The routing station’s email address will
						appear in the "From" field of the routed
						email.
	155	PRINT ROUTED	*1	Inc. Only	Selecting whether a received fax to be routed is always
		DOCUMENT			printed, or only when the routing operation fails.
			2	Always
	156	PRINT FORWARDED	*1	Inc. Only	Selecting whether a memory received fax, or email to be
		DOCUMENT			forwarded is always printed, or only when forwarding is
			2	Always
					incomplete.
	157	TRANSACTION	*1	Invalid	Selecting whether the machine sends a transaction journal
		JOURNAL			to the pre-programmed email address.
			2	Valid
	158	PC REMOTE UPDATE	*1	Invalid	Selecting whether the machine will accept commands from
					an email application, to:
			2	Valid
					(a) Program the Internet Parameters
					(b) Program the Auto Dialer
					(c) Allow retrieval of the Journal
	159	SUBJECT LINE ENTRY	*1	Invalid	Selecting whether the "Subject" line can be programmed
					during each transmission.
			2	Valid
	160	DEFAULT DOMAIN	1	Invalid	Selecting whether the machine accepts to insert the Default
					Domain when entering Manual Number Dialing.
			*2	Valid
	161	DNS SERVER	1	Invalid	Selecting whether to enable the DNS Server.
			*2	Valid
	162	TIFF VIEWER URL	1	None	Selecting whether to include the URL address in the email
					message body.
			*2	English
			3	English+
				Japanese
	163	ROUTING HEADER	*1	Invalid	Selecting whether to add the Header Print information of the
					Routing Station on the top edge of each routed pages.
			2	Valid
	164	IFAX XMT HEADER	*1	Included	Selecting whether to include the header when sending a
		(Email only)			document to an address in the same Domain as specified in
			2	Not included
					the Default Domain parameter. (This is useful when using
					the machine to scan documents back to your PC.)
					Note: When sending to a Domain other than as specified in
					the Default Domain parameter, the header will be
					included regardless of the selection.
	168	CC/BCC STATION	*1	Invalid	Selecting whether to allow the CC/BCC email address(es)
					to be entered.
			2	Valid
	169	DHCP CLIENT	1	Invalid	Select whether the machine would automatically acquire the
					Network Parameters from the DHCP Server. (Such as IP
			*2	Valid
					Address, Subnet Mask, Default Gateway IP Address,etc.)
					Note: If you change the setting of this parameter, turn the
88					Power OFF/ON.