Panasonic VDR-D210, VDR-D310, VDR-D230 operating instructions Edit the DVD menu as required, 106

With a computer (VDR-D310/VDR-D230)

≥If the screen showing a brief explanation of the application is displayed, close it.

DVD-MovieAlbumSE starts and the images recorded on the disc are displayed.

When starting DVD-MovieAlbumSE, the [Mount Information] dialog box may appear or the recorded images may not be shown. If this occurs, try the following procedure. If there are multiple drives, a drive other than this unit may be selected.

1)Click [Preference] on the dialog box or

([Preference]) button at top right of DVD-MovieAlbumSE screen, and then click the [Device setting] tab.

2)Choose the drive where the disc is loaded in the [Drive Select] column, and then click [OK].

5 (When using a DVD-RAM only)

Edit the images on the disc as required.

6 Click [Export].

7 Set the export settings in the [Export all titles] screen and click [Start].

≥It is recommended that you do not change the settings displayed on the screen.

8 When export is complete, a message will appear. Check the

small box for [Eject the disc being used.], and then click [Yes].

DVD-MovieAlbumSE automatically closes and DVDfunSTUDIO automatically starts.

9 Insert a brand-new DVD-RW or DVD-R disc into the unit.

10 When the [CollectTool] screen appears, click [OK].

The exported scene will be automatically registered on the DVDfunSTUDIO editing screen.

11 Edit the DVD menu as required.

≥Set the disc size to [8cm DVD] or [8cm DVD DL].

≥Select the desired destination drive to write to if necessary.

106

LSQT1145