Panasonic VDR-D230, VDR-D310, VDR-D210 operating instructions About recovery, 122

Others

CARD LOCKED.	The write protection switch on the SD card is set to LOCK. (l 26)
CARD FULL.	The SD card is full so no further data can be recorded. Delete
	unnecessary files (l 78) or insert a new SD card.
PUSH THE RESET
SWITCH.
CHECK THE DISC AFTER	An irregularity in the unit has been detected. Press the RESET
	button to restart the unit. (l 130)
PUSHING THE RESET
SWITCH TO REPAIR THE
DATA.
CHANGE TO MANUAL
MODE.
CANCEL MAGICPIX MODE.	You are attempting to use a function that cannot be used
	simultaneously.
TURN OFF THE VIDEO
LIGHT.
CANNOT SET.	With DVD-RW (Video format) and DVD-R, if the number of dates
	displayed becomes 99 when [PLAY MODE] is set to [BY DATE], you
	cannot change the aspect setting from 16:9 to 4:3 and vice versa.
PLEASE CONNECT AC	Finalizations cannot be executed and the unit cannot be connected
ADAPTOR	to the computer when using a battery. Use the AC adaptor.
DISCONNECT USB	The unit cannot correctly establish the connection to the computer
	or printer. Disconnect and reconnect the USB cable and then select
CABLE.
	the desired USB function again.
CANNOT OPERATE WHILE	The unit’s power cannot be turned off when the unit is connected to
CONNECTED TO
	the computer.
COMPUTER.

About recovery

It is possible that the system cannot complete writing of a file normally when, for example, power is turned off for some reason during recording or editing.

If faulty management information is found when a disc is accessed, the following message may appear. Be sure to follow the messages. (Repairing may take time depending on the error.)

DISC ERROR HAS OCCURRED. NOW REPAIRING DATA ON THE DISC.

≥When you repair the disc, use a battery with sufficient battery power or the AC adaptor. Even if the power is turned off without repairing the disc, you can repair the disc when you turn the power on again.

≥Depending on the condition of the data, it may not be possible to completely repair the data.

≥Do not repair a disc that has been recorded on another device. This may cause the loss of data or the disc.

122

LSQT1145