Panasonic VDR-D310, VDR-D210, VDR-D230 operating instructions 132

Others

With a computer (Macintosh)

Problem	Check points
	≥ The USB function selection screen does not appear if the USB
	cable is connected while the menu screen is displayed.
Even if connected by the	# Close the menu screen before connecting the USB cable.
	≥ Is the AC adaptor connected?
USB cable, this unit is not
recognized by the	# Use the AC adaptor when connecting the unit and a computer.
	≥ Select another USB terminal on the computer.
computer.
	≥ Check the operating environment. (l 110)
	≥ Turn the unit off then on and disconnect then reconnect the
	USB cable.
DVD-RAM or DVD-RW	≥ What version of Mac OS X are you using?
	# If it is V10.3.x or earlier, the icon is not displayed even if the disc
(VR format) icon is not
	is recognized by the computer. Use Disk Utility or Apple System
displayed on the desktop.
	Profiler to verify if the disc is recognized by the computer.
Cannot select this unit as	≥ Cannot write to this unit with ImageMixer 3.
the write destination	# To create a DVD-Video disc, a separate DVD-RW/DVD-R/+RW/
drive with ImageMixer 3.	+R drive is required.
The DISC EJECT lever	≥ The DISC EJECT lever does not work after the unit is
does not work when the
	connected to the computer. Use the software’s eject button to
unit is connected to the
	eject the disc.
computer.
When the USB cable is	≥ When the drive icon is displayed on the desktop, drag the icon
disconnected, an error	into the Trash and then disconnect the USB cable.
message will appear on	≥ When the drive icon is not displayed on the desktop, exit the
the computer.	application and then disconnect the USB cable.

132

LSQT1145