34
LSQT1145
Setup
A few moments after the ACCESS/PC lamp
blinks, the cover of the disc compartment will
open slightly.
3Open the cover of the disc
compartment by hand and insert/
remove the disc.
Inserting disc
Fit the disc onto the spindle in the center and
then push the disc down until it clicks into place.
ARecording/playback side
BPickup lens
Removing disc
While pressing down on the spindle, grasp the
edge of the disc and gently lift it out.
Take care not to touch the recording/playback
sides of a disc when inserting or removing it.
4Push the section marked
PUSH CLOSE on the cover of the
disc compartment to close the
cover.
If you use a new DVD-RW, it is necessary to
format the disc. (l25)
Identifying recording/playback sides of
disc
Single sided disc:
The recording/playback side is opposite to the
labelled side.
Double sided disc:
The “SIDE A” recording/playback side is the side
opposite the side with the “SIDE A” mark. The
A
B
LSQT1145.book 34 ページ 2006年12月28日 木曜日 午前9時34分