32
LSQT1145
Setup
1Connect the AC cable to the AC
adaptor and the AC outlet.
2Connect the DC cable to the AC
adaptor.
3Connect the DC cable to this unit.
Do not use the AC cable with any other
equipment as it is designed only for this unit.
Do not use the AC cable from other equipment
with this unit.
While the DC cable is connected to the AC
adaptor, the battery will not charge.
When recording, remove the lens cap before
turning the unit on.
If the unit is turned on with the lens cap
attached, the automatic white balance
adjustment (l136) may not function properly.
While pressing the button A, set the
OFF/ON switch to ON.
The status indicator B lights and the power turns
on.
When the unit is turned on for the first time, a
message asking you to set the date and time
will appear. Select [YES] and set the date and
time. (l42)
While pressing the button A, set the
OFF/ON switch to OFF.
The status indicator B goes off when the power
turns off.

Connecting to the AC outlet

Turning the unit on/off

How to turn on the power
How to turn off the power
B
A
B
A
LSQT1145.book 32 ページ 2006年12月28日 木曜日 午前9時34分