100
LSQT1145
With a computer (VDR-D310/VDR-D230)
4Select [NTSC (North America)]
for the TV system, click [Next].
Continue to follow the on-screen messages to
install it.
5Click [Finish].
1Insert the CD-ROM into the
computer.
The introduction movie starts.
Click [To continue the installation] at the end of
the introduction movie and then the [Setup
Menu] screen will appear.
If the introduction movie screen does not
appear, double-click the CD-ROM drive icon in
[My Computer].
2Click [DVDfunSTUDIO].
The software application may not run properly
if you cancel the installation at any point (e.g.
by pressing [Cancel]).
Depending on the operating environment, you
may be required to install DirectX 9.0c. If so,
click [Yes], and install it.
If you install the software in a computer that is
not compatible with DirectX 9.0c, the computer
may not work properly. If you are unsure
whether or not your computer is compatible,
contact the maker of your computer.
3Click [Next].
4Select [NTSC (North America)]
for the TV system, click [Next].
Continue to follow the on-screen messages to
install it.
5Click [Finish].
1Select [start] #
[All Programs (Programs)] #
The computer must be rebooted for the
application to work.

Installing DVDfunSTUDIO

The computer must be rebooted for the
application to work.

Starting the applications

LSQT1145.book 100 ページ 2006年12月28日 木曜日 午前9時34分