Panasonic VDR-D310, VDR-D210, VDR-D230 Connection, Copying still picture files to a computer, 114

With a computer (VDR-D310/VDR-D230)

≥If you disconnect the USB cable while the access lamp is on, it may damage the data.

Using an SD card on a computer (Macintosh)

Connection

¬Connect this unit to the AC adaptor.

1 Insert an SD card with recorded images in the unit, then turn on the unit.

2 Connect this unit and a computer.

A

AUSB cable (supplied)

≥Insert the plugs as far as they will go. The unit and computer will not operate properly if the plugs are not inserted fully.

≥Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB cables.)

The USB function selection screen will appear.

3 Select [PC CONNECT(CARD)] and press the joystick.

icon appears.

≥When the unit is connected to a computer, its power cannot be turned off.

In this case, disconnect the USB cable (l 115).

≥When a computer is accessing a card in this

unit, the card access lamp lights. ( appears on the LCD monitor.) Do not disconnect the USB cable or AC adaptor while the card is being accessed as it may damage the data.

Copying still picture files to a computer

1 Double-click the [NO_NAME] icon.

The folders on the SD card are displayed.

2 Select the file in the [100CDPFP] folder to copy and drag and drop it to the destination copy folder.

∫Example folder structure of an SD card:

DCIM

100CDPFP

MISC

≥JPEG format still pictures (IMGA0001.JPG etc.) are stored in the [100CDPFP] folder. These can be opened with picture software that supports JPEG pictures.

≥Up to 999 files can be recorded in the [100CDPFP] or other such folder.

≥The DPOF setting files are recorded in the [MISC] folder.

≥Do not use the computer to delete the SD card’s folders. Otherwise, it may no longer be possible for this unit to read the SD card.

≥Always use this unit to format SD cards.

≥When data not supported by this unit has been recorded on a computer, it will not be recognized by this unit.

114

LSQT1145