1pic/ 2pics/ 3pics/ 4pics/ 5pics/ 6pics/ 7pics/ 8pics/ 9pics/ 10pics/ 20pics/ 30pics/ 50pics/ 100pics/ 200pics/
300pics/ 500pics/ 1000pics/ 2000pics/ 3000pics
•Default: 100pics
•Recording duration
Approximate time to be taken to save the set “Number of images” with the set “Transmission interval” will
be displayed.

[Image capture size]

Select the capture size of images to be transmitted to the FTP server, images to be attached to the alarm
E-mail, or images to be saved to the SD memory card.
When “2 mega pixel [16:9]” is selected for “Image capture mode”
SW559
SW559
SP509
SP509
SF549
SF549
SF539
SF539
: 1920x1080/640x360/320x180
SW558
SW558
SP508
SP508
SF548
SF548
SF538
SF538
: 640x360/320x180
When “1.3 mega pixel [16:9]” is selected for “Image capture mode”
1280x720/640x360/320x180
When “1.3 mega pixel [4:3]” is selected for “Image capture mode”
1280x960/VGA/QVGA
When “3 mega pixel [4:3]” is selected for “Image capture mode”
2048x1536 fix
•Default: 640x360
Note
SW559
SW559
SP509
SP509
SF549
SF549
SF539
SF539
:
•When “2 mega pixel [16:9]” is selected for “Image capture mode”, “1920x1080” can only be used when
it is saved to the SD memory card.
•When “3 mega pixel [4:3]” is selected for “Image capture mode”, “2048x1536” can only be used when
it is saved to the SD memory card.

[Image compression rate upon alarm detection]

Select “On” or “Off” to determine whether or not to change the image quality of “Quality1” (®page 81) upon
alarm detection.
•On: Images will be transmitted with the image quality selected for “Image quality upon alarm detection”.
•Off: Does not change the image quality upon alarm detection.
•Default: Off

[Image quality upon alarm detection]

Image quality can be changed upon an alarm occurrence. Select the image quality from the following.
0 Super fine/ 1 Fine/ 2/ 3/ 4/ 5 Normal/ 6/ 7/ 8/ 9 Low
•Default: 5 Normal
13.3 Configure the settings relating to H.264recording [Alarm] (WV-SW559/WV-SP509/WV-SF549/WV-SF539)
Click the [Alarm] tab on the “Alarm” page. (®page 46, page 48)
Operating Instructions 117
13 Configure the alarm settings [Alarm]