Panasonic 13.6 Configure the VMD settings [VMD area]

[Open (Up to 5 characters)]
Enter the name for “Open” of “AUX” on the “Live” page.
•Unavailable characters: " &
•Default: Open
[Close (Up to 5 characters)]
Enter the name for “Close” of “AUX” on the “Live” page.
•Unavailable characters: " &
•Default: Close
Note
•AUX is a camera terminal that allows users to operate (Open/Close) arbitrarily from the “Live” page.
For example, an operator can remotely control lights in a place where the camera is installed by
connecting the terminal to the light controller.
13.6 Configure the VMD settings [VMD area]
Click the [VMD area] tab on the “Alarm” page. (®page 46, page 48)
The video motion detection areas can be set on this page.
Up to 4 areas can be set. When motion is detected in the set area, it will be regarded as an alarm.
IMPORTANT
•The alarm occurrence indication button (®page 11) will be displayed when motion is detected by the
VMD function.
•The alarm occurrence indication button will be displayed when receiving an alarm input of a terminal
alarm or a command alarm.
•Depending on the network environment, notification may be delayed even when “Real time” is selected
for “Alarm status update mode” on the [Basic] tab of the “Basic” page (®page 52).
•After configuring the VMD area, the VMD area may move out of alignment when the JPEG/H.264
“Image capture mode” setting is changed. Make sure to check the VMD area after changing the “Image
capture mode” setting.
•After configuring the VMD area, the VMD area may move out of alignment when “Extra optical
zoom” is configured. Make sure to check the VMD area after configuring “Extra optical zoom”.
120 Operating Instructions
13 Configure the alarm settings [Alarm]