•Off: The interactive control with face detection will not work.
•Default: Off
Note
•When “Off” is selected for “Super Dynamic(SD)”, the interactive control with face detection is
unavailable.
[Adaptive black stretch]
Select “On” or “Off” to determine whether or not to activate the darkness compensation function. The darkness
compensation function can make darker parts of images brighter by digital image processing.
•On: Activates the darkness compensation function.
•Off: Deactivates the darkness compensation function.
•Default: Off
IMPORTANT
•When “On” is selected for “Adaptive black stretch”, noise in the darker parts may be increased, and
parts around borders between the darker parts and the brighter parts may become darker/brighter than
the other darker/brighter parts.
Note
•When “On” is selected for “Super Dynamic(SD)”, “Adaptive black stretch” is unavailable.
[Back light compensation (BLC)]
Select “On” or “Off” to determine whether or not to activate the back light compensation (BLC) function. When
“On” is selected for “Super Dynamic(SD)”, this setting is unavailable.
The back light compensation function can compensate back light by setting mask areas on brighter parts of
images.
•On: Mask areas will be set automatically.
•Off: Mask areas will not be set automatically. It is necessary to set them manually.
•Default: Off
[Mask area]
When “Off” is selected for “Super Dynamic(SD)” and “Back light compensation (BLC)”, it is possible to
compensate for backlight by masking brighter areas.
Refer to page 96 for information on how to set the mask area.
[Fog compensation]
Select “On” or “Off” to determine whether or not to activate the fog compensation function. When “On” is
selected for “Super Dynamic(SD)” or “Adaptive black stretch”, this setting is not available.
The fog compensation function can make dim images that have been affected by fog or other conditions clearer
using digital image processing.
•On: Activates the fog compensation function.
•Off: Stops the fog compensation function.
•Default: Off
[Level]
Adjust the fog compensation level.
The level of fog compensation will increase when the cursor is moved in the “+” direction, and decrease when
the cursor is moved in the “-” direction. Click the [Reset] button to reset to the default setting.
Default: 64
[Light control mode]
Select the light control mode from the following.
Operating Instructions 93
11 Configure the settings relating to images and audio [Image/Audio]