5. To delete the VMD area, click the [Delete] button corresponding to the area to be deleted.
→The outline of the respective VMD area will disappear.
6. Click the [Set] button.
→The edited settings will be applied.
13.7 Configuration of the settings relating to theE-mail notification [Notification]
Click the [Notification] tab on the “Alarm” page. (®page 46, page 48)
The settings relating to the alarm E-mail can be configured. It is necessary to configure the settings of the
E-mail server to perform the E-mail notification. (®page 143)

E-mail notification

[E-mail server >>]
When “E-mail server >>” is clicked, the [E-mail] tab of the “Server” page will be displayed. (®page 143)
[E-mail notification]
Select “On” or “Off” to determine whether or not to provide notification by E-mail according to the settings for
the “Alarm” and “Diag.” checkboxes of “Destination of notification” below.
–When an alarm is detected (“Alarm”)
SW559
SW559
SP509
SP509
SF549
SF549
SF539
SF539
:
–When a notification of the remaining capacity of the SD memory card has been provided (“Diag.”)
–When the SD memory card has become full (“Diag.”)
–When the SD memory card cannot be recognized (“Diag.”)
•Default: Off
124 Operating Instructions
13 Configure the alarm settings [Alarm]