Panasonic 18.5 Configure the settings relating to SNMP [SNMP]

Enter in the form of “(host name). (domain name)”.
•Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the
hyphen (-).
•Default: None (blank)
Note
•Refer to the network administrator for further information about the available host names.
[Access interval]
Select the interval to access the Dynamic DNS Update service server to check the IP address and the host
name from the following.
10min/ 20min/ 30min/ 40min/ 50min/ 1h/ 6h/ 24h
•Default: 24h
18.4.6 When using “Dynamic DNS Update(DHCP)”
[Host name]
Enter the host name to be used for the Dynamic DNS Update service.
•Available number of characters: 3 - 250 characters
Enter in the form of “(host name). (domain name)”.
•Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the
hyphen (-).
•Default: None (blank)
Note
•Refer to the network administrator for further information about the available host names.
18.5 Configure the settings relating to SNMP
[SNMP]
Click the [SNMP] tab on the “Network” page. (®page 46, page 48)
178 Operating Instructions
18 Configuring the network settings [Network]