Paradyne 2600 IP DSLAM manual Connecting a Modem to the Console Port

2. Cabling

Connecting a Modem to the Console Port

Procedure

To connect a modem to the CONSOLE port:

1.Determine and procure the proper DCE cable type for your modem. The CONSOLE port requires a DB9 plug connector. The other connector depends on the serial port on your modem, but normally a DB25 plug is required. The cable must be an EIA-232-E crossover (null modem) cable.

2.Connect the DB9 plug connector to the CONSOLE port socket.

3.If the modem will be permanently connected, fasten the connector to the Management Module with its captive screws. If the BitStorm 2600 is in a rack, dress the cable to the left and attach it to the rail with a cable tie.

4.Connect the other end of the cable to the serial port of your modem.

Serial Port

Modem

PWR ALM TST

LINE

ETHERNET

PORT1-
10/100BT	PORT2-
	10/100BT	1000BT
		PORT3
		LINK	ACT
		ALARM

CONSOLE

Port

GigE
STATUS	ALARM	TEST

1	3	5
2			7	9
	4	6			11	13	15
			8	10				17
					12				19	21
						14	16	18			23
									20	22
											24

DSL PORTS 1-24

03-17448

2-8 January 2004 2600-A2-GN20-10