Paradyne 2600 IP DSLAM manual DSL Ports

2. Cabling

DSL Ports

The BitStorm 2600 DSL connector supports the tip and ring connections of up to 24 DSL ports over a 50-position cable.

A POTS (plain old telephone service) splitter connector is also provided, for CO applications only. The internal splitter includes an ANSI T1.413-compliant Maintenance Test Signature (MTS) circuit. If your model does not contain the integrated POTS splitter, you must connect the unit to a separate POTS splitter. The Model 6051 POTS Splitter must be used for customer premises applications in Canada.

Procedure

To cable the DSL Ports:

1.Insert a cable tie (provided) through the top of the anchor mount next to the DSL PORTS 1–24 connector.

2.If the connector for your cable has a short captive screw, attach the cable to the DSL PORTS 1–24 connector and fasten it to the jack screw with its short captive screw.

#4-40	Anchor
Jack Screw	Mount

Short

Screw

50-Pin

Connector 02-17083

3.If the connector for your cable has a long captive screw, remove the provided jack screw from the threaded hole next to the DSL PORTS 1–24 connector. Attach the DSL PORTS 1–24 connector to the unit using the long, captive pan-head screw (provided).

Anchor

Mount

Long

Screw

50-Pin02-17346

Connector

2-2 January 2004 2600-A2-GN20-10