Paradyne SMD2000-24T Connecting to the Remote Shdsl Modems, Loop Bonded Shdsl Connection

3.Slide the RJ21 plug connector of your SHDSL cable underneath the hook-and-loop fastener from the right and press it firmly into the RJ21 socket on the chassis.

4.Pull the hook-and-loop fastener strap upward, making sure that it is snug against the RJ21 connector, and then pull the strap back down over itself such that the hook-and-loop fastener layers stick to one another.

5.Screw the left side of the RJ21 plug connector into the jack screw on the left side of the RJ21 socket on the chassis. If you are using a 120 or 180 degree cable, both the left and right sides of the RJ21 plug connector should be secured to the socket.

Connecting to the Remote SHDSL Modems

A primary feature of the SMD2000-24T is its capability to support multiple loop bonded SHDSL connections. However, it is equally capable of supporting up to 24 single line connections, as well as combinations of both single and loop bonded connections.

Loop Bonded SHDSL Connection

Multiple SHDSL ports (consecutive or not) may be connected with a single remote SHDSL modem as long as the remote modem is also loop bonding capable. Refer to Product to Product SDSL Loop Bonding Compatibility, (Document Number COMP-A2-GK42), for a complete list of SDSL loop bonding capable products.

12