EMI Notices
United States – EMI Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
The authority to operate this equipment is conditioned by the requirements that no modifications will be made to the equipment unless the changes or modifications are expressly approved by Paradyne Corporation.
If the equipment includes a ferrite choke or chokes, they must be installed as described in the installation instructions.
Canada – EMI Notice
This Class A digital apparatus complies with Canadian
Cet appareil numérique de la classe A est conforme à la norme
ACTA Customer Information
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the Administrative Council for Terminal Attachments (ACTA). On the bottom of the network extender is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
The T1 network connections should be made using a Universal Service Order Code (USOC) type RJ48C jack. The Service Order Code 6.0F should be specified to the telephone company when ordering the T1 line. In addition, the proper Facility Interface Code must be specified to the Telephone Company. The network extender can be configured to support any of the following framing format and line signaling techniques. The network extender's configuration must correspond to the T1 line's parameters.
Facility Interface Codes | Code Description | |
|
|
|
1.544 | Mbps superframe format (SF) without line power | |
|
|
|
1.544 | Mbps SF and B8ZS without line power | |
|
|
|
1.544 | Mbps ANSI ESF without line power | |
|
|
|
1.544 | Mbps ANSI ESF and B8ZS without line power | |
|
|
|
27
