Parker Hannifin acr-motion max api users guide Graphics Functions, AXInitializeGPH, AXSetGphView

Public Declare Function AX_SetRov Lib "MotionCore.DLL" _

(ByVal RovVal as Double) As Integer

Public Declare Function AX_SetSov Lib "MotionCore.DLL" _

(ByVal SovVal as Double) As Integer

(Graphics Functions)

AX_InitializeGPH

Description	Initialize Graphics Engine and give it the handle of the Control to plot to, this is typically a PictureBox
	control in VB. The DLL will extract the coordinates of the window in pixels, and use these coordinates
	form then on. It is important to not move the window once it has been initialized as incorrect display of
	graphics could occur.
Returns	(Integer) 1 on Success, 0 on Failure
Arguments	Long … Handle (. hwnd) of the Graphics control
VB Example:	Ret = AX_InitializeGPH
Declaration:	Declare Function AX_InitializeGPH Lib _
	"MotionCore.DLL" (ByVal ProcHwnd As Long) As Integer

AX_SetGphView

Description	Informs the Graphics Engine which View Port to Use.
ViewPort Layout:
	0=Top	4=NE
	1=Front	5=NW
	2=Side	6=SE
	3=NW	7=SW

ZoomAll -> Tells Engine to refresh ViewPort to outer boundaries. Depending on if Parameter “UseMachWindow=1” if not it uses the Saved ViewPort coordinates.

Returns	(Integer) 1 on Success, 0 on Failure
Arguments	viewpoint as Integer, ZoomAll As integer
VB Example:	Ret = AX_ SetGphView (0)	‘set to top view
Declaration:	Public Declare Function AX_SetGphView Lib _

"MotionCore.DLL" (ByVal viewpoint As Integer, ByVal ZoomAll as Integer) As Integer

16 - API Command Descriptions API Users Guide