General safety advice for electrical power tools / Before first use
ed area with water. Seek additional medical help if any of the fluid gets into your eyes. Escaping battery fluid may cause skin irritation or burns.
Safety advice relating to cordless drill drivers
Securely support the workpiece. A workpiece held in a clamp or vice is kept more securely in place than one held by your hand.
WARNING! POISONOUS DUSTS! Harmful / noxious dusts generated from your work represent a risk to the health of the person operating the device and to anyone near the work area.
Wear safety glasses and a dust mask!
Do not drill any material containing asbestos. Asbestos is a known carcinogen. Hold the electrical power tool firmly. High reaction torques may occur momentarily during tightening or loosening of screws.
If the inserted tool jams, switch off the electrical power tool immediately. Be prepared for high reaction torques as they may cause kickback. The inserted tool may jam if the electrical power tool is overloaded or is held at an angle to the workpiece.
WARNING! The inserted tool may strike concealed electricity cables, therefore when working you must hold the electrical power tool by the insulated handle areas only. Contact with a live wire means that the metal parts of the electrical power tools may become live and this can result in an electric shock.
Before you carry out any tasks on the device, transport or store it, make sure that the direction of rotation switch is in the middle position (lock). To prevent the device from starting up unintentionally. Children or persons who lack the knowledge or experience to use the device or whose physical, sensory or intellectual capacities are limited must never be allowed to use the device without supervision or instruction by a person responsi-
ble for their safety. Children must never be allowed to play with the device.
Attention - Service lines!
DANGER! Take steps to ensure that you do not hit upon any service lines (electricity, gas, water) when work- ing with electrical appliances. Check, if need be with a service line detector, before you start to cut or bore into a surface.
Original ancillaries / accessories
Use only the ancillaries and accessories that are detailed in the operating instructions. The use of ancillaries and ac- cessories other than those recommended in the operating instructions could lead to an in- creased risk of personal injury for you.
Before first use
Charging the battery pack
WARNING! DANGER OF ELECTRIC SHOCK! Before cleaning or servicing the charging station or the battery pack always ensure that the plug is not in the mains socket.
Note! A new battery pack, or one that has not been in use for an extended period, must be charged up before the first / renewed usage.
The battery pack attains its full capacity after ca.
CAUTION! Always ensure the plug is removed from the mains socket before inserting a battery pack into, or removing one from, the charging station.
Never charge the battery pack if the ambient temperature is less than 10 °C or greater than 40 °C.
10 GB
