Manuals / Patton electronic / Computer Equipment / Network Card

Patton electronic 1082/144 user manual

Models: 1082/144 1082

1 32

Download 32 pages 14.59 Kb

Page 31

Image 31

Notes

_________________________________________________________

31

Page 31

Image 31

Contents

An ISO-9001 Certiﬁed Company USER MANUALMODEL 1082 and 1082/144 iDSL Modem with V.34 or X.21 InterfaceInstallation TABLE OF CONTENTSWarranty Information ConfigurationModel 1082C and 1082D Interface Pin Assignments Model 1082 SpecificationsModel 1082C and 1082D Factory Replacement Parts and Accessories1.1 FCC INFORMATION 1.0 WARRANTY INFORMATION1.2 CE NOTICE Tel 301 E-mail support@patton.com 1.3 SERVICE2.0 GENERAL INFORMATION 2.1 FEATURES2.2 DESCRIPTION remote 1082s 2.3 1082 SNMP MANAGEMENT SOLUTIONSHTTP/HTML Management connections to3.1 CONFIGURING THE HARDWARE DIP SWITCHES 3.0 CONFIGURATIONFigure 2. Removing the cover to access DIP switches S1 and S2 Position Conﬁguring DIP Switch S1Factory Default S1 Summary TableS1-1 Switches S1-1 and S1-2 Data RateSwitch S1-3 Data Set Ready during Line Loopback Test SettingSwitch S1-8 Response to RDL Request Switch S1-4 Must be set to the ON position ReservedSwitch S1-5 Asynchronous/Sync Operation Switches S1-6 and S1-7 System Clock ModeSetting Conﬁguring DIP switch S2S1-8 S2 Summary TableSwitches S2-4 and S2-5 Not Assigned Switches S2-1 19.2 kbps or 144* kbps Synchronous Rate EnableSwitch S2-2 Front Panel Switch Disable Switches S2-3 Response to Local Line Loop Requests from DTES2-7 Switch S2-6 Response to RDL Request from DTESwitch S2-7 Compatability Mode Switch S2-8 Not Assigned4.1 CONNECTING THE TWISTED PAIR INTERFACE 4.0 INSTALLATIONV.35 connector Power input connectorDSL Span Model 4.2 CONNECTING THE MODEL 1082 V.35 SERIAL INTERFACEConnecting the Model 1082 V.35 to a DTE Device Connecting the Model 1082 V.35 to a DCE DeviceConnecting the Model 1082 X.21 to a “DCE” or “DTE” Device 4.3 CONNECTING THE MODEL 1082 X.21 SERIAL INTERFACEFigure 7. Connecting the Model 1082 to V.35 serial DCE Straight-through Opening the Case15-pin D-Sub cable Universal AC Power 100-240VAC In this example, the DCE/DTE strap is configured for DTEDB-15 connector 4.4 CONNECTING POWERTo Power Supply JackTo -48VDC Vin Source DC Power+Vin DSL Link 5.1 POWER-UP5.0 OPERATION 5.2 LED STATUS MONITORSLocal Line Loopback LLB 5.3 TEST MODESRemote Digital Loopback RDL Using the V.52 BER test pattern generator A.1 TRANSMISSION FORMAT A.6 DIAGNOSTICSA.7 LED STATUS INDICATORS APPENDIX AA.14 WEIGHT A.8 CONNECTORSA.9 POWER A.13 DIMENSIONSDescription APPENDIX BModel # MODEL 1082C AND 1082D FACTORY REPLACEMENT PARTS AND ACCESSORIESV.35 INTERFACE M/34 Female ConnectorSignal APPENDIX CSignal D-Sub-15 Female ConnectorAPPENDIX D DTE /DCE OrientationMODEL 1082C AND 1082D INTERFACE PIN ASSIGNMENT X.21 Interface DB-15 Female Connector DTE /DCE ConﬁgurationAPPENDIX E SignalPage Copyright 2000 Patton Electronics Company All Rights Reserved