SmartNode 4940 Getting Started Guide

A • Compliance information

 

 

Compliance

EMC

FCC Part 15, Class A

EN55022, Class A

EN55024

Safety

UL 60950-1/CSA C22.2 N0. 60950-1

IEC/EN60950-1

AS/NZS 60950-1

PSTN Regulatory

FCC Part 68

CS-03

TBR 4

AS/ACIF S016

AS/ACIF S038

NZ ISDN Layer 3 Supplement

Radio and TV Interference

The SmartNode router generates and uses radio frequency energy, and if not installed and used properly-that is, in strict accordance with the manufacturer’s instructions-may cause interference to radio and television reception. The SmartNode router have been tested and found to comply with the limits for a Class A comput- ing device in accordance with specifications in Subpart B of Part 15 of FCC rules, which are designed to pro- vide reasonable protection from such interference in a commercial installation. However, there is no guarantee that interference will not occur in a particular installation. If the SmartNode router does cause interference to radio or television reception, which can be determined by disconnecting the unit, the user is encouraged to try to correct the interference by one or more of the following measures: moving the computing equipment away from the receiver, re-orienting the receiving antenna and/or plugging the receiving equipment into a different AC outlet (such that the computing equipment and receiver are on different branches).

Compliance

38

Page 38
Image 38
Patton electronic 4940 manual Compliance, Radio and TV Interference, Safety, Pstn Regulatory