Patton electronic 3088RC pulse = system status ok, pulses = IMRC2/IA buffer is saturated

Status. Blinks yellow from one to eleven times to indicate system status. Each pulse pattern is separated by a 2 second “off” period. Greater pulse patterns have higher priority (buffer saturation has greater priority than an empty MAC table). Valid system statuses are:

•1 pulse = system status ok

•2 pulses = No MAC entries in the MAC address table

•3 pulses = Clear to send (CTS) or Carrier Detect (DCD) from base unit are not asserted

•4 pulses = IMRC2/IA buffer is saturated

•5 pulses = WAN receive frame(s) too large

•6 pulses = WAN receive frame(s) not Octet aligned

•7 pulses = WAN receive frame(s) aborted

•8 pulses = Detected WAN receive frame(s) with bad CRC

•9 pulses = Detected LAN receive frame(s) too large

•10 pulses = Detected LAN receive frame(s) not Octet aligned

•11 pulses = Detected LAN receive frame(s) with bad CRC

After a status code is displayed eight times and the associated condition is removed, the status code will no longer appear.

Link. Glows green to indicate good link integrity on the 10Base-T twisted pair line.

36