Patton electronic 3088RC user manual System ConÞguration Commands

•dsl help: Lists all the commands that start with dsl that the console recognizes.

•dsl set help: Lists all the commands that start with dsl set that the console recognizes.

•dsl show help: Lists all the commands that start with dsl show that the console recognizes.

•dsl show errcntr help: Lists all the commands that start with dsl show errcntr that the console recognizes.

System ConÞguration Commands

The following commands allow the user to conÞgure the system:

•system set password <password>: Sets the system password.

•system set circuitid <circuitid>: Sets the circuit ID.

•system set clockmode <internalexternalreceiverecover>: Sets the clock mode. Internal clock mode means the 3088RC provides the clock to both the DSL and the serial interface. External clock mode means the 3088RC uses the serial transmit clock as its DSL transmit clock. Receive recover clock mode means that the 3088RC uses the DSL receive clock as its DSL transmit clock and as the serial receive clock.

Note X.21 External Clock Mode—The X.21 interface expects the DCE to provide the clock used for both transmitting data and for sampling receive data. When the 3088RC/D/V is set as a DCE, it may be used in internal or receive recover clock modes. The DSL generates a clock that is provided to the X.21 interface.

When the 3088RC/D/V is a DTE, it may be used in external clock mode. The X.21 interface needs to provide the clock. This clock is used by the DSL to sample the serial data and also to update the receive data.

The 3088RC is set for either DCE or DTE by ßipping the daugh- ter-card. The 3088RC is a DCE if DCE points toward the front of the 3088RC.

•system set dteif <normale1>: Set to E1 if the rear card is Model 3088RC/K/K. Set to normal for all other models.

The following commands allow the user to view the current system conÞguration:

22