Patton electronic RocketLink-G NTU Rack Mount G.SHDSL Modem Card, 3088RC user manual

Models: 3088RC RocketLink-G NTU Rack Mount G.SHDSL Modem Card

1 60
Download 60 pages 17.5 Kb
Page 49
Image 49
Figure 22 is a screenshot of opening a typical remote console session:

Figure 22 is a screenshot of opening a typical remote console session:

Manual backgroundLog in to 3088RC (Near End)

system show status command shows that DSL link is not up

remote console command requests a remote console session on 3088RC (Far End)

Message informs us that the 3088RC (Far End) did not respond and a remote

console session was not opened

system show status command shows that the DSL link state is success

remote console command requests a remote console session on 3088RC (Far End)

Message informs us that we are now connected to the 3088RC (Far End) console

We can now enter commands on the remote console

Figure 22. Opening a typical remote console session

How to Disconnect . The remote console session ends under any of the following conditions:

The user enters the command logout

A timeout period of 5 minutes elapses since the user has entered a command to the console.

The DSL link drops.

The response upon logging out of the remote console session with the command logout is Console: Remote console connection lost. The fol- lowing is what is displayed upon a user’s logging out of a remote console session after logging in.

>remote console

Console: Remote console connection established.

password: ******

> logout

Console: Remote console connection lost.

49

Page 49
Image 49
Patton electronic RocketLink-G NTU Rack Mount G.SHDSL Modem Card, 3088RC user manual