
Running a Remote Task | 95 |
CommandParameters
PNAME(name)
PNODEID(id, pswd, newpswd)
RMTWORK(*YES*NO)
SNODEID(id, pswd, newpswd)
TRACEOPT Trace Instructions: (L,S,F,C,X,K,D,H,V,W,P*NONE*ALL*EXT
*COMMON*INITPARMS*CURRENT Command Trace Options: L,S,F,C,X,K,D,H,V,P*ALL*EXT*COMMON *NONE)
†For tasks on z/OS, Microsoft Windows, HP NonStop, VM, and VSE
‡For tasks on i5/OS, Microsoft Windows, OpenVMS, UNIX, Stratus VOS ‡‡ For tasks on z/OS, HP NonStop, VM, and VSE
Note: The CLASS parameter is not used by Sterling Connect:Direct for i5/OS.
Required Parameters
The following two parameters are required when you use the CDRUNTASK command.
SNODE(remote-node-name)
specifies a
Note: This value is case sensitive.
One of the next two parameters is required for the CDRUNTASK command. Each parameter lists the environments for which they apply.
PGM(program-name)
specifies the RUN TASK program name on the remote node. The following environments can use this parameter: OS/390, Microsoft Windows, Tandem, VM, and VSE
CMD(command)
specifies
Refer to the IBM Sterling Connect:Direct Processes Web site at http://www.sterlingcommerce.com/documentation/processes/processhome.html for parameter values for the remote node.