Receiving a File | 67 |
Because the file attributes match, the block mode transfer occurs.
C:D i5: sending
request: source blksize=6400; dest blksize = not specified;
srce file: lrecl=80
dest file: NEW (on z/OS)
CDSND Examples-Setting Actual Blocksize
In the fourth example, the following events occur:
the remote node sets the destination file blocksize to 3200, the actual blocksize of the destination file.
Sterling Connect:Direct for i5/OS calculates the simulated blocksize at 3200.
The blocksizes are identical, so block mode transfer occurs.
C:D i5: sending
request: source blksize=not specified; dest blksize = not specified;
srce file: lrecl=80
dest file: existing: lrecl=80, blksize=3200 (on z/OS)
CDSND and CDRCV Example
In the fifth example, Sterling Connect:Direct for i5/OS calculates the simulated blocksize at 32720 since the copy is between two Sterling Connect:Direct for i5/OS nodes.
C:D i5 sending and receiving
request: source blksize=not specified; dest blksize=not specified
srce file: lrecl=32720
dest file: new
Using the CDRCV Screens
Use the Sterling Connect:Direct Receive File (CDRCV) screens to initiate a Sterling Connect:Direct session and receive a file from a remote node. CDRCV uses certain special function keys as follows:
F24 more keys gives you access to additional function keys used in CDRCV.
F5 refresh which clears any field entries you have made.
F9 which gives you access to all parameters.
F11 which displays key words.
F14 which displays command strings.
F15 which displays any error messages pending.
F16 which marks the command complete.
Receiving a File From a Remote Node
Complete the following steps to receive a file from a remote node.
1.Access the CDRCV screens by typing CDRCV at the command line and pressing F4 or by choosing the receive file option from the Sterling Connect:Direct main menu.
2.Type in the remote node name at the screen prompt and press Enter. The command retrieves the remote node environment and display fields for required parameters.
3.Type values for required and optional parameters as appropriate and press Enter.
