Sending a File 21

CDSND Command Format

The following table shows the parameters for the CDSND command. Required parameters are in bold.

Command Parameters
CDSND SNODE(remote-node-name)
SNODENVIRN(remote-environment-name)
FDSN(‘from data-set-name’)
TDSN(‘to data-set-name’)
FMSYSOPTS(‘
PRECMPR(*YES|*NO)
EXITCMD(valid i5/OS command)
FAILCMD(valid i5/OS command)
SNDFFD(*YES|*NO)
TEXTFILE(*YES|*NO)
TYPE(FILE|MBR|OBJ)
XTRAN(table-name)[XTRANLSO(so-code)|XTRANPAD(pc)|
XTRANLSI(si-code)|XTRANLDATA(MIXED|DBCS)
CODEPAGE(nnnnn,nnnnn)]
CCSID(nnnnn)
EORCHAR(xxxx)
ALWNULL(Y)
’)
TOSYSOPTS(‘
DECMPR(*YES|*NO)
EXITCMD(valid i5/OS command)
FAILCMD(valid i5/OS command)
TYPE(FILE|MBR|OBJ|SPLF)
CODEPAGE(nnnnn,nnnnn)
CCSID(nnnnn)
EORCHAR(xxxx)
’)
BLKSIZE(n|*CALC)
CKPTINV(n)
CLASS(n)
COMPRESS(*NO|*YES|*EXT|X\xx\|C\cc\)
CRC(*INITPARMS|*NETMAP|*OFF|*ON)
ECTUNING(ecclevel,ecwinsize,ecmlevel)
EXCLUDE(generic|member-name|(start-range|stop-range)|‘list’)
FDISP(current, normal end, abnormal end)
NOTIFY(userid)
PLEXCLASS(user-defined class)
PNAME(process-name)
PNODEID(id, pswd, newpswd)
REPLACE(*YES|*NO)
† Sterling Connect:Direct Secure Plus parameter.