Sending a Spool File | 89 |
*INITPARMS indicates the traces specified in the initialization parameters.
*CURRENT selects the trace bits that the session manager is currently using.
Command Trace Options
L,S,F,C,X,K,D,H,V,P*ALL*EXT*COMMON *NONE)
specifies the trace bits that define functions to be traced for this command but not for the Process it runs. The following are valid options:
L enables the main line logic trace for all components.
S enables the Process step logic trace.
F enables the file handler trace.
C enables the common logic trace.
X enables the XDR trace.
K enables the KQV logic trace.
D enables the
H enables the FMH dump.
V enables the XDR dump.
P enables the CIPC dump.
*ALL enables all product traces.(L, S, F, C, X, K, D, H, V, and P)
*EXT enables all product traces plus two other traces. (TRCICF and TRCJOB)
*COMMON enables the most commonly used traces. (L, S, F, C, and H)
*NONE turns off all traces.
TSPACE(avgblk, type, primary, secondary, pdsblk, rlse, contig, round)
specifies the amount of storage to be allocated for new files on the destination node. If TSPACE is specified, the DISP of the destination file must be NEW. If TSPACE is not specified and the DISP is NEW, space allocation defaults to the value obtained from the source file (unless a TTYPE has been specified). The default allocation is in blocks, and if supplied with the ROUND option, provides
avgblk defines the average block size.
type defines the space allocation. Valid values are:
CYL specifies that space is to be allocated by cylinder.
TRK specifies that space is to be allocated by track.
blk specifies that space is to be allocated by the average block length of the data and is the default. The system computes the number of tracks to be allocated. If the subparameter ROUND is also specified, the system allocates the space in cylinders. ROUND is preferred because allocation is performed on cylinders in a
primary specifies the primary allocation of storage (number of units).
secondary specifies the secondary allocation of storage (number of units).
pdsblk specifies the number of PDS directory blocks to be created in the file.
rlse sets the release of unused storage allocated to the output file. Valid values are *YES and *NO.
contig specifies the contiguous storage for the primary allocation. Valid values are *YES and *NO.
round specifies the rounding of storage allocated by average block length to an integral number of cylinders. Valid values are *YES and *NO.
