28IBM Sterling Connect:Direct for i5/OS User’s Guide

The following TOSYSOPTS parameters are valid for TYPE(SPLF) files: DEV(*JOB*SYSVALdevice-name)specifies the name of the printer device description.

DEVTYPE(*IPDS*SCS)*USERASCII specifies the type of data stream created for a printer file from the data received.

PAGESIZE(page-lengthpage-width)specifies the length and width of the page used by the printer. This parameter overrides the FORMTYPE parameter.

LPI(3467.589) specifies the line space setting (lines per inch) on the printer.

CPI(5101213.31516.71820) specifies the printer character density, in characters per inch, for the printer.

OVRFLW(overflow-line-number)specifies the line number on the page where overflow to a new page begins. The value specified must not exceed the form length specified for PAGESIZE.

FOLD(*NO*YES) specifies whether entire records are printed when the record length exceeds the form width.

RPLUNPRT(*YES ‘replacement-character’*NO)specifies whether unprintable characters are replaced with printable characters when printed. It also specifies the replacement character.

ALIGN(*NO*YES) specifies whether the page must be aligned in the printer before printing is started.

CTLCHAR(*NONE*FCFC) specifies whether the data contains printer control characters.

CHLVAL(*NORMAL (channel#1 line#1) ... (channel#12 line#12)) specifies the list of channel numbers with their assigned line numbers. Note that CTLCHAR(*FCFC) must be specified as a SYSOPTS parameter for this to be a valid parameter.

FORMFEED(*DEVD*CONT*CUT*AUTOCUT) specifies the form feed attachments used by the printer (4214, 5219, and 5553 printers only).

PRTQLTY(*STD*DRAFT*DEVD*NLQ) specifies the quality of print produced.

DRAWER(123*E1) specifies the source drawer to be used when automatic cut-sheet feed mode is used. FORMFEED(*AUTOCUT) must be specified as a SYSOPTS parameter for this to be a valid parameter.

FONT(*CPI*DEVDfont-identifier)specifies the font identifier to be used for the spooled output file.

CHRID(*DEVD*SYSVAL graphic-character-set code-page) specifies the character identifier to be used for the spooled output file. This parameter allows you to print data with different character identifier coding.

PAGRTT(*DEVD*COR090180270) specifies the degree of rotation (clockwise from the edge of the paper first loaded into the printer) of text on each page printed. 090180270 indicates the specific angle of rotation.

PRTTXT(‘print-text’)specifies a line of text to be printed at the bottom of each page printed. Up to 30 characters enclosed in single quotes is specified.

JUSTIFY(050100) controls the print positions of the characters on the page (in the spooled file) so the right margin is regular.

DUPLEX(*NO*YES*TUMBLE) specifies whether the spooled output file is printed on one or both sides of the paper.

SPOOL(*YES*NO) specifies whether the data is sent to a spooled file prior to printing.

OUTQ(*JOB*DEVlibrary-name/output-queue- name) specifies the output queue for the spooled output file created. This parameter is valid only when SPOOL(*YES).

FORMTYPE(form-type)specifies the type of form to use in the printer when the spooled file is printed. A form-type identifier is user-defined and is no longer than 10 characters. The PAGESIZE parameter overrides this parameter.

Page 28
Image 28
IBM CDI5UG1107 manual IBM Sterling ConnectDirect for i5/OS User’s Guide