Submitting a Job on a Remote Node | 113 |
newpswd specifies the new security password and is used by the security system to change the current security password to the new security password
Note: Parameter values are case sensitive.
Newpswd is not valid if the remote node is a Sterling Connect:Direct for i5/OS node.
TRACEOPT
Trace Instructions
(L, S, F, C, X, K, D, H, V, W, P,*NONE*ALL*EXT *COMMON*INITPARMS*CURRENT)
specifies the trace bits that define functions to be traced by Sterling Connect:Direct for i5/OS. The following are valid options:
L enables the main line logic trace for all components.
S enables the Process step logic trace.
F enables the file handler trace.
C enables the communications logic trace.
X enables the XDR trace.
K enables the KQV logic trace.
D enables the
H enables the FMH dump.
V enables the XDR dump.
W enables the communications dump.
P enables the CIPC dump.
*NONE turns off all traces.
*ALL enables all product traces.(L, S, F, C, X, K, D, H, V, W and P)
*EXT enables all product traces plus two system traces (TRCICF and TRCJOB).
*COMMON enables the communications traces. (L, S, F, C, and H)
*INITPARMS indicates the traces specified in the initialization parameters.
*CURRENT selects the trace bits that the session manager is currently using.
Command Trace Options
(L,S,F,C,X,K,D,H,V,P*ALL*EXT*COMMON *NONE
specifies the trace bits that define functions to be traced for this command but not for the Process it runs. The following are valid options:
L enables the main line logic trace for all components.
S enables the Process step logic trace.
F enables the file handler trace.
C enables the common logic trace.
X enables the XDR trace.
K enables the KQV logic trace.
D enables the
H enables the FMH dump.
V enables the XDR dump.
P enables the CIPC dump.
*ALL enables all product traces.(L, S, F, C, X, K, D, H, V, and P)