IBM CDI5UG1107 manual Sacctsnode accounting-data, SNODEIDid,pswd,newpswd

106IBM Sterling Connect:Direct for i5/OS User’s Guide

SACCT(SNODE accounting-data)

specifies the accounting data for the remote node. The maximum length of the accounting data is 256 characters. If special characters are part of the accounting data, the string must be enclosed in single quotation marks.

SNODEID(id,pswd,newpswd)

specifies security user IDs and passwords at the remote node. This parameter should only be used to validate security with a different user ID than the one you used to sign on to Sterling Connect:Direct.

id specifies the security user ID passed to the security system on the remote node (1–64 alphanumeric characters).

pswd specifies the current security password on the remote node and is used by the security system on the remote node to validate the current security password (1–64 alphanumeric characters). This is optional unless the user has security set to require a password.

newpswd specifies the new security password and is used by the security system to change the current security password to the new security password (1–64 alphanumeric characters).

Note: Sterling Connect:Direct for i5/OS does not support newpswd if the remote node is an i5/OS node. Parameter values are case sensitive.

TRACEOPT

Trace Instructions

(L, S, F, C, X, K, D, H, V, W, P,*NONE*ALL*EXT *COMMON*INITPARMS*CURRENT

specifies the trace bits that define functions to be traced by Sterling Connect:Direct for i5/OS. The following are valid options:

™L enables the main line logic trace for all components.

™S enables the Process step logic trace.

™F enables the file handler trace.

™C enables the communications logic trace.

™X enables the XDR trace.

™K enables the KQV logic trace.

™D enables the all-purpose data dump.

™H enables the FMH dump.

™V enables the XDR dump.

™W enables the communications dump.

™P enables the CIPC dump.

™*NONE turns off all traces.

™*ALL enables all product traces.(L, S, F, C, X, K, D, H, V, W and P)

™*EXT enables all product traces plus two system traces (TRCICF and TRCJOB).

™*COMMON enables the communications traces. (L, S, F, C, and H)

™*INITPARMS indicates the traces specified in the initialization parameters.

™*CURRENT selects the trace bits that the session manager is currently using.

Command Trace Options

L,S,F,C,X,K,D,H,V,P*ALL*EXT*COMMON *NONE)

specifies the trace bits that define functions to be traced for this command but not for the Process it runs. The following are valid options:

™L enables the main line logic trace for all components.