
Sending a Spool File | 75 |
Command Parameters
TLABEL(seqno,labeltype,pswdread,inout,retpd,expdt)
TLINK(vmid,pwd,accmode,cuu)
TPROTCT(*YES*NO)
TRACEOPT Trace Instructions: (L,S,F,C,X,K,D,H,V,W,P*NONE*ALL*EXT
*COMMON*INITPARMS*CURRENT Command Trace Options: L,S,F,C,X,K,D,H,V,P*ALL*EXT*COMMON *NONE)
TSPACE(avgblk,type,primary,secondary,pdsblk,rise, contig,round) (For z/OS nodes only)
TTYPE(name)
TVOL(*YES*NO)
TVSAMCAT(dsnvmidpwdaccmodecuu)
†Sterling Connect:Direct Secure Plus for i5/OS parameter.
Note: The CLASS parameter is not used by Sterling Connect:Direct for i5/OS.
Required Parameters
Unless otherwise noted, these required parameters apply to all remote node environments.
SNODE(remote-node-name)
specifies a
Note: This value is case sensitive.
SNODENVIRN(remote-environment-name)
specifies the remote node environment.
SPLF(name)
specifies the name of the spooled output file to be copied.
JOB(*job-name user-name job-number)
specifies the name of the job that created the spooled output file. Valid values are:
*specifies that the job issuing the command is the job that created the spooled output file.