Peavey ICA Series, ICA 600, ICA 800V, ICA 2400V, ICA 1200 manual ICA 400V Specifications

ICA™ 400V SPECIFICATIONS

Rated Power (two channels): 200 watts @ 20 Hz - 20 kHz both channels driven at <0.1% THD

Rated Power (one channel): 215 watts @ 1 kHz at <0.0075%

THD

Minimum Load Impedance: ICA 400V-70: 25 ohms

ICA 400V-100: 50 ohms

Maximum RMS Voltage Swing: ICA 400V-70: 86 volts

ICA 400V-100: 116 volts

Frequency Response:

10 Hz - 25 kHz; +0, -.3 dB at 1 watt

Power Bandwidth:

ICA 400V-70:

10 Hz - 100 kHz; +0, -3 dB at rated power

ICA 400V-100:

10 Hz - 50 kHz; +0, -.3 dB at rated power

THD (two channels driven): ICA 400V-70:

<0.1% @ 200 W from 20 Hz - 20 kHz with both channels driven

ICA 400V-100:

<0.15% @ 200 W from 20 Hz -

20 kHz with both channels driven

THD (one channel driven):

ICA 400V-70:

<0.005% @ 200 W @ 1 kHz ICA 400V-100:

<0.015% @ 200 W @ 1 kHz

SMPTE IMD:

<0.1% 60 Hz and 7 kHz, 200 W

Slew Rate:

ICA 400V-70: 30 V/µs

ICA 400V-100: 40 V/µs

Damping Factor:

ICA 400V-70:

>1,000:1 @ 20 Hz - 400 Hz

ICA 400V-100:

>2,000:1 @ 20 Hz - 400 Hz

Input CMRR:

> -65 dB @ 1 kHz

Voltage Gain:

x40 (32 dB)

Input Sensitivity:

ICA 400V-70:

1.77volts for rated output ICA 400V-100:

2.5volts for rated output

Input Impedance:

20 k ohms, balanced

Hum and Noise:

>-110 dB, “A” weighted referenced to rated power

Crosstalk: ICA 400V-70:

>-70 dB, “A” weighted referenced to rated power

ICA 400V-100:

>-65 dB, “A” weighted referenced to rated power

Current Draw @ 1/8 power:

ICA 400V-70: 415 watts

ICA 400V-100: 385 watts

Current Draw @ 1/3 power:

ICA 400V-70: 600 watts

ICA 400V-100: 565 watts

Idle Current Draw:

ICA 400V-70:

38 watts in Standby Mode ICA 400V-100:

43 watts in Standby Mode

Maximum Current Draw:

ICA 400V-70:

970 watts for rated power ICA 400V-100:

840 watts for rated power

Thermal Emissions (BTU/hr.):

500 @ 1/3 power,

350 @ 1/8 power

Cooling:

80 mm DC fan, off until heatsinks reach 45o C, then variable speed

Controls:

2 rear panel attenuators, sequential turn-on / off

Indicator LEDs:

2 Clip, 2 Signal, 2 LFC, 1 Protect,

1 Power

Protection:

Temp., DC, turn-on bursts, subsonic, incorrect load or short

Connectors:

8-pin plugable signal input, 4-pin plugable sequential power,

4-terminal barrier strip, IEC AC power connector

Construction:

All steel; 16 ga. chassis, 18 ga. top, 12 ga. rack ears

Dimensions: 3.48" x 19" x 16.4"

88.4 mm x 483 mm x 416.6 mm

Gross Weight:

33.5 lbs. (15.2 kg.)

Net Weight:

31 lbs. (14 kg.)

Due to our efforts for constant improvements, features and specifications are subject to change without notice.

58